Electronic Data Interchange
Electronic data interchange (EDI) is the structured transmission of data between organizations by electronic means. It is used to transfer electronic documents or business data from one computer system to another computer system, i.e. from one trading partner to another trading partner without human intervention.
It is more than mere e-mail; for instance, organizations might replace bills of lading and even cheques with appropriate EDI messages. It also refers specifically to a family of standards.
In 1996,the National Institute of Standards and Technology defined electronic data interchange as "the computer-to-computer interchange of strictly formatted messages that represent documents other than monetary instruments. EDI implies a sequence of messages between two parties, either of whom may serve as originator or recipient. The formatted data representing the documents may be transmitted from originator to recipient via telecommunications or physically transported on electronic storage media.". It distinguishes mere electronic communication or data exchange, specifying that "in EDI, the usual processing of received messages is by computer only. Human intervention in the processing of a received message is typically intended only for error conditions, for quality review, and for special situations. For example, the transmission of binary or textual data is not EDI as defined here unless the data are treated as one or more data elements of an EDI message and are not normally intended for human interpretation as part of online data processing."
EDI can be formally defined as the transfer of structured data, by agreed message standards, from one computer system to another without human intervention.
Standards
EDI is considered to be a technical representation of a business conversation between two entities, either internal or external. Note that there is a perception that "EDI" constitutes the entire electronic data interchange paradigm, including the transmission, message flow, document format, and software used to interpret the documents. EDI is considered to describe the rigorously standardized format of electronic documents. EDI is very useful in supply chain.
The EDI standards were designed to be independent of communication and software technologies. EDI can be transmitted using any methodology agreed to by the sender and recipient. This includes a variety of technologies, including modem (asynchronous and synchronous),FTP, e-mail, HTTP, AS1, AS2, etc.It is important to differentiate between the EDI documents and the methods for transmitting them. When they compared the synchronous protocol 2400 bit/s modems, CLEO devices, and value-added networks used to transmit EDI documents to transmitting via the Internet, some people equated the non-Internet technologies with EDI and predicted erroneously that EDI itself would be replaced along with the non-Internet technologies. These non-internet transmission methods are being replaced by Internet protocols such as FTP, telnet, and e-mail, but the EDI documents themselves still remain.
As more trading partners use the Internet for transmission, standards have emerged. In 2002, the IETF published RFC 3335, offering a standardized, secure method of transferring EDI data via e-mail. On July 12, 2005, an IETF working group ratified RFC4130 for MIME-based HTTP EDIINT (a.k.a. AS2) transfers, and is preparing a similar RFC for FTP transfers (a.k.a. AS3).While some EDI transmission has moved to these newer protocols, the providers of the value-added networks remain active.
EDI documents generally contain the same information that would normally be found in a paper document used for the same organizational function. For example an EDI 940 ship-from-warehouse order is used by a manufacturer to tell a warehouse to ship product to a retailer. It typically has a ship to address, bill to address, a list of product numbers (usually a UPC code) and quantities.
Another example is the set of messages between sellers and buyers, such as request for quotation (RFQ), bid in response to RFQ, purchase order, purchase order acknowledgment, shipping notice, receiving advice, invoice, and payment advice. However, EDI is not confined to just business data related to trade but encompasses all fields such as medicine (e.g., patient records and laboratory results), transport (e.g., container and modal information), engineering and construction, etc. In some cases, EDI will be used to create a new business information flow (that was not a paper flow before). This is the case in the Advanced Shipment Notification (856) which was designed to inform the receiver of a shipment, the goods to be received and how the goods are packaged.
There are four major sets of EDI standards:
- The UN-recommended UN/EDIFACT is the only international standard and is predominant outside of North America.
- The US standard ANSI ASC X12 (X12) is predominant in North America.
- The TRADACOMS standard developed by the ANA (Article Numbering Association) is predominant in the UK retail industry.
- The ODETTE standard used within the European automotive industry.
All of these standards first appeared in the early to mid 1980s. The standards prescribe the formats, character sets, and data elements used in the exchange of business documents and forms. The complete X12 Document List includes all major business documents, including purchase orders (called "ORDERS" in UN/EDIFACT and an "850" in X12) and invoices (called "INVOIC" in UN/EDIFACT and an "810" in X12).
The EDI standard says which pieces of information are mandatory for a particular document, which pieces are optional and give the rules for the structure of the document. The standards are like building codes. Just as two kitchens can be built "to code" but look completely different, two EDI documents can follow the same standard and contain different sets of information. For example a food company may indicate a product's expiration date while a clothing manufacturer would choose to send color and size information.
Specifications
Organizations that send or receive documents between each other are referred to as "trading partners" in EDI terminology. The trading partners agree on the specific information to be transmitted and how it should be used. This is done in human readable specifications (also called Message Implementation Guidelines). While the standards are analogous to building codes, the specifications are analogous to blue prints. (The specification may also be called a mapping but the term mapping is typically reserved for specific machine readable instructions given to the translation software.) Larger trading "hubs" have existing Message Implementation Guidelines which mirror their business processes for processing EDI and they are usually unwilling to modify their EDI business practices to meet the needs of their trading partners. Often in a large company these EDI guidelines will be written to be generic enough to be used by different branches or divisions and therefore will contain information not needed for a particular business document exchange. For other large companies, they may create separate EDI guidelines for each branch/division.
Transmission
Trading partners are free to use any method for the transmission of documents. In the past one of the more popular methods was the usage of a bisync modem to communicate through a value added network (VAN). Some organizations have used direct modem to modem connections and bulletin board systems (BBS), and recently there has been a move towards using some of the many Internet protocols for transmission, but most EDI is still transmitted using a VAN. In the healthcare industry, a VAN is referred to as a "clearinghouse".
Value-added networks
Healthcare clearinghouses perform many of the same functions as a VAN, but have additional legal restrictions that govern VANs also provide an advantage with certificate replacement in AS2 transmissions. Because each node in a traditionally business-related AS2 transmission usually involves a security certificate, routing a large number of partners through a VAN can make certificate replacement much easier.
- Value Added Networks
- Value Added Networks are the go-between in EDI communications
- The VAN is responsible for routing, storing and delivering EDI messages. They also provide delivery reports
- Depending on the VAN type, messages may need extra envelopes or may be routed using intelligent *VANs which are able to read the EDI message itself.
· VANs may be operated by various entities:
- telecom companies;
- industry group consortia;
- a large company interacting with its suppliers/vendors.
-
Internet/AS2
Until recently, the Internet transmission was handled by nonstandard methods between trading partners usually involving FTP or email attachments. There are also standards for embedding EDI documents into XML. Many organizations are migrating to this protocol to reduce costs. For example, Wal-Mart is now requiring its trading partners to switch to the AS2 protocol (Wal-Mart EDI Requirement).
AS2 (Applicability Statement 2) is the draft specification standard by which vendor applications communicate EDI or other business-to-business data (such as XML) over the Internet using HTTP, a standard used by the World Wide Web. AS2 provides security for the transport payload through digital signatures and data encryption, and ensures reliable, non-repudiable delivery through the use of receipts.
EDI via the Internet (Web EDI)
The Internet, as with VAN providers, uses its own communications protocols to ensure that EDI documents are transmitted securely. The most popular protocols are File Transfer Protocol Secure (FTPS), Hyper Text Transfer Protocol Secure (HTTPS), and AS2.
The Internet has provided a means for any company, no matter how small or where they are located in the world, to become part of a major supply chain initiative hosted by a global retailer or manufacturing company. Many companies around the world have shifted production of labour intensive parts to low-cost, emerging regions such as Brazil, Russia, India, China, and Eastern Europe. Web-based EDI, or webEDI, allows a company to interact with its suppliers in these regions without the worry of implementing a complex EDI infrastructure.
In its simplest form, webEDI enables small to medium-sized businesses to receive, turn around, create and manage electronic documents using just a web browser. This service seamlessly transforms your data into EDI format and transmits it to your trading partner. Simple pre-populated forms enable businesses to communicate and comply with their trading partners' requirements using built-in business rules. Using a friendly web-based interface, EDI transactions can be received, edited and sent as easily as an email. You will also be able to receive EDI documents and send EDI invoices and shipping documents with no software to install. All you require is an Internet connection. WebEDI has the added advantages that it is accessible anywhere in the world and you do not need a dedicated IT person to manage any software installation.
Even though VANs offer a very secure and reliable service to companies wishing to trade electronically, the Internet is making EDI more available to all. This is especially important in the emerging markets where IT awareness and infrastructure are very limited. WebEDI is traditionally based on the "hub and spoke'"model, with major trading partners or Application Service Providers (ASPs) being the hubs and smaller partners being the spokes.
Hubs or ASPs implement EDI using email or virtual mailboxes Trading partners can send EDI messages directly to a web-enabled EDI messaging site, via the hub. EDI messages are simply sent using a web browser.
Systems that are currently being developed will enable EDI messages to be displayed in a web browser and directed via open standard XML, directly into the user's accounts system WebEDI-based users can interact with VANs without incurring the costs of setting up a dedicated VAN connection.
Interpreting data
EDI translation software provides the interface between internal systems and the EDI format sent/received. For an "inbound" document the EDI solution will receive the file (either via a Value Added Network or directly using protocols such as FTP or AS2), take the received EDI file (commonly referred to as a "mailbag"), validate that the trading partner who is sending the file is a valid trading partner, that the structure of the file meets the EDI standards and that the individual fields of information conforms to the agreed upon standards. Typically the translator will either create a file of either fixed length, variable length or XML tagged format or "print" the received EDI document (for non-integrated EDI environments). The next step is to convert/transform the file that the translator creates into a format that can be imported into a company's back-end business systems or ERP. This can be accomplished by using a custom program, an integrated proprietary "mapper" or to use an integrated standards based graphical "mapper" using a standard data transformation language such as XSLT. The final step is to import the transformed file (or database) into the company's back-end enterprise resource planning (ERP) system.
For an "outbound" document the process for integrated EDI is to export a file (or read a database) from a company's back-end ERP, transform the file to the appropriate format for the translator. The translation software will then "validate" the EDI file sent to ensure that it meets the standard agreed upon by the trading partners, convert the file into "EDI" format (adding in the appropriate identifiers and control structures) and send the file to the trading partner (using the appropriate communications protocol).
Another critical component of any EDI translation software is a complete "audit" of all the steps to move business documents between trading partners. The audit ensures that any transaction (which in reality is a business document) can be tracked to ensure that they are not lost. In case of a retailer sending a Purchase Order to a supplier, if the Purchase Order is "lost" anywhere in the business process, the effect is devastating to both businesses. To the supplier, they do not fulfill the order as they have not received it thereby losing business and damaging the business relationship with their retail client. For the retailer, they have a stock outage and the effect is lost sales, reduced customer service and ultimately lower profits.
In EDI terminology "inbound" and "outbound" refer to the direction of transmission of an EDI document in relation to a particular system, not the direction of merchandise, money or other things represented by the document. For example, an EDI document that tells a warehouse to perform an outbound shipment is an inbound document in relation to the warehouse computer system. It is an outbound document in relation to the manufacturer or dealer that transmitted the document.
Advantages of using EDI over paper systems
EDI and other similar technologies save a company money by providing an alternative to, or replacing information flows that require a great deal of human interaction and materials such as paper documents, meetings, faxes, etc. Even when paper documents are maintained in parallel with EDI exchange, e.g. printed shipping manifests, electronic exchange and the use of data from that exchange reduces the handling costs of sorting, distributing, organizing, and searching paper documents. EDI and similar technologies allow a company to take advantage of the benefits of storing and manipulating data electronically without the cost of manual entry. Another advantage of EDI is reduced errors, such as shipping and billing errors, because EDI eliminates the need to rekey documents on the destination side. One very important advantage of EDI over paper documents is the speed in which the trading partner receives and incorporates the information into their system thus greatly reducing cycle times. For this reason, EDI can be an important component of just-in-time production systems.
According to the 2008 Aberdeen report "A Comparison of Supplier Enablement around the World", only 34% of purchase orders are transmitted electronically in North America. In EMEA, 36% of orders are transmitted electronically and in APAC, 41% of orders are transmitted electronically. They also report that the average paper requisition to order costs a company $37.45 in North America, $42.90 in EMEA and $23.90 in APAC. With an EDI requisition to order costs are reduced to $23.83 in North America, $34.05 in EMEA and $14.78 in APAC.
Barriers to implementation
There are a few barriers to adopting electronic data interchange. One of the most significant barriers is the accompanying business process change. Existing business processes built around slow paper handling may not be suited for EDI and would require changes to accommodate automated processing of business documents. For example, a business may receive the bulk of their goods by 1 or 2 day shipping and all of their invoices by mail. The existing process may therefore assume that goods are typically received before the invoice. With EDI, the invoice will typically be sent when the goods ship and will therefore require a process that handles large numbers of invoices whose corresponding goods have not yet been received.
Another significant barrier is the cost in time and money in the initial set-up. The preliminary expenses and time that arise from the implementation, customization and training can be costly and therefore may discourage some businesses. The key is to determine what method of integration is right for the company which will determine the cost of implementation. For a business that only receives one P.O. per year from a client, fully integrated EDI may not make economic sense. In this case, businesses may implement inexpensive "rip and read" solutions or use outsourced EDI solutions provided by EDI "Service Bureaus". For other businesses, the implementation of an integrated EDI solution may be necessary as increases in trading volumes brought on by EDI force them to re-implement their order processing business processes.
The key hindrance to a successful implementation of EDI is the perception many businesses have of the nature of EDI. Many view EDI from the technical perspective that EDI is a data format; it would be more accurate to take the business view that EDI is a system for exchanging business documents with external entities, and integrating the data from those documents into the company's internal systems. Successful implementations of EDI take into account the effect externally generated information will have on their internal systems and validate the business information received. For example, allowing a supplier to update a retailer's Accounts Payables system without appropriate checks and balances would be a recipe for disaster. Businesses new to the implementation of EDI should take pains to avoid such pitfalls.
Increased efficiency and cost savings drive the adoption of EDI for most trading partners.
